For recirculation of water-soluble metalworking coolant (cutting emulsion) our Dutch customer confirms that ATACH compact stainless steel centrifugal pumps deliver reliable quality

ATACH pump WB70-090.pdf

Customer requirements from the Netherlands are as follows:

Requirements:

- Horizontal, dry-installed (not submersible), self-priming centrifugal pump

- Medium: water-soluble metalworking coolant (emulsion) with fine steel and aluminium particles

- Duty point: approx. 30 l/min at 25-30 m head

- Motor: 3-phase 400 V, 50 Hz (please state the rated voltage range on the nameplate)

- Max. installation envelope: 160 mm wide x 340 mm long x 200 mm high

- Suction and discharge approx. G 3/4

- Please propose the most suitable model from your horizontal pump range

ATACH model WB70/090-P perfectly meets your requirements.

Performance specifications of WB70/090-P:

• Mechanical seal: SS304-FKM, tungsten carbide / silicon carbide      (wear and corrosion resistant)

• Pump material: SS304 stainless steel

• Flow rate: 1.2~7.2 m³/h

• Head: 28.5~23.5 m

• Power: 0.9 kW / 1.2 HP

• Self-priming height: 8 m

• Quantity of impeller: 1

• Impeller type: closed impeller

• Inlet & outlet: BSP G1¼ × G1 (clamp connection available upon request)

• Pump weight: approx. 11 kg

Should you have any questions or interest in this pump, please contact ATACH, a professional manufacturer of stainless steel pumps.