Aitek China usually has two types of motors. One is the standard motor, which is used in conjunction with couplings. Another type is the extended shaft motor directly fitted onto the impeller. This kind of motor is specially designed and processed on the basis of the standard motor.The product description of the Aitek brand centrifugal pump mainly adopts a direct connection design, that is, the motor is directly connected to the pump body, and the motor shaft is used as the rotor shaft of the pu

Sometimes customers ask, when using packing seals, it is required that water leak out at the sealing point to cool the shaft, which would cause the pump installation site to be unclean. Then why is there still a requirement to use packing as the pump shaft seal?Despite the risk of leakage, packing seals are still widely used in some pump types, mainly for the following reasons: ;Youdaoplaceholder0 Cost and maintenance advantages ; : The packing seal has a simple structure, low manufa

Often, customers of ATACH Pump Industry order chemical centrifugal pumps without motors and bare shaft parts. Therefore, after receiving the pumps, the motors held by the customers themselves need to be coupled and connected to the ATACH bare shaft pumps. Now, we will explain the connection requirements and precautions as follows:When connecting the motor of a split-type chemical pump, a ; dial indicator is used to ensure the ; shaft alignment accuracy of the ; coupling, avoidi

Some new customers, when consulting the sales department of ATACH about the selection of mechanical seals for pumps, often say that they should provide us with the best quality mechanical seals because they are not very familiar with mechanical seals. In fact, this statement is not accurate. Each type of mechanical seal made of different materials has its suitable working conditions. Even the very cheap nitrile rubber performs well when used in oily media. The technical department of ATACH Pump

Some time ago, an old customer from the UK asked us. They were clear about the parameter requirements of the water pump, but they were confused about whether to choose the vertical or horizontal structure of the water pump. Which installation structure is more suitable? Now, Aitek Pump Industry will make an analysis and explanation:Vertical water pumps and horizontal water pumps each have their own advantages and disadvantages in terms of structure, installation, performance and maintenance. Whe

ATACH Pump Industry supports the processing and production of shafts made of special materials, with high cost performance.The material selection for the main shaft of a chemical centrifugal pump should be determined based on the characteristics of the medium (such as corrosiveness, temperature, and pressure) and the requirements of the working conditions. Common materials include carbon steel, ; stainless steel, ; alloy steel, etc., as follows:Carbon steelHigh-quality carbon structu